Weihua fabricated 2 sets of 190m-lift height gantry cranes for vertical shaft construction successfully passed the acceptance by China Water Resources and Hydropower. Features 1. The ultra-high-lift gantry crane adopts a lightweight design, which has the characteristics of light weight, small wheel pressure and low headroom, which can meet the construction requirements of various tunnels. 2. The lifting height can reach 190m with fast lifting speed and high efficiency; a folding reel is used to ensure that the wire ropes are arranged neatly and avoid rope disorder; the whole crane adopts digital frequency conversion speed regulation, which can effectively control the synchronization speed and accuracy. 3. Safe and good performance, the mechanism is equipped with three-level braking, and the auxiliary trolley hoisting mechanism adopts the redundant design of double ropes. When one rope fails, the other rope can operate independently to ensure the safety of the lifting of the cage, and the safety factor reaches Elevator level standard.

The construction of smart ports around the world has becoming more and more important. The importance of the upgrading of port equipment and the intelligent research and development of control systems has become a main concern of many port equipment solution providers, which guides the development of Weihua port machine. Today we will see how did Weihua Group provide smart container yard solutions to customers. Now lets have a look at the Weihua intelligent container storage yard in the Zhoushan Archipelago in Zhejiang Province to see how it operates efficiently without any worker there. In the 40 million-ton refining and chemical project, container trucks travel in an orderly manner in the Weihua intelligent container storage yard. As an intelligent and green container yard operation system, a total of 6 remote-controlled automated RMG crane in the project are equipped with automatic positioning, real-time monitoring and intelligent remote-control systems, which can realize unmanned 7X24 hours management, the overall project can be automated and efficient.

Product: Gantry Crane Girder: Double Girder Capacity: 2000 Tons Span: 62 Meters Application: Power Plant Weihua is a leading lifting solutions provider in China. Main products: project overhead crane, gantry crane, portal crane, jib crane, sts, RMG, RTG, etc.

Weihua provide a capacity 80/32T metallurgy EOT crane for an unmanned steel plant. This crane is designed with a span of 24.6m and a rail surface elevation of 29.26m, and the lifting spreader is a hook with round electromagnetic lifter. Features: 1. This EOT crane owns the world leading anti-sway automatic positioning technology with smooth running, accurate position and reliable performance; 2. It has the functions of 360-degree real-time monitoring, intelligent anti-collision, to ensure On-site safety of personnel and equipment; 3. The software adopts the AICraneWMSv3.0 warehouse management system, and is matched with the original digital

Weihua provided port crane and material handling solutions for Xiangyang Port, an inland river port in China. The Xiaohe Port Area of Xiangyang Port is planned to build 21 berths, with a designed annual throughput of 15.1 million tons, mainly for general cargo, bulk cargo (including sand and gravel) and containers. The entire port area occupies a coastline length of 2,495 meters and a land area of 1.36 million square meters. At present, the first phase of the Xiaohe Port Comprehensive Wharf has been completed in nearly three months, and the overall operation is smooth. 4 conditional general cargo berths and 3 bulk cargo operation lines are operating at full capacity at the same time. As of February 25, the port has completed a cumulative cargo throughput of 6.05%. 10,000 tons, the container throughput is 106TEU. In this project

Helpful equipment before installation: Wrench tool box, tow rope, gear oil, forklift, truck crane, etc. The installation guide steps: 1. Fill the gearbox oil 2. Electric cabinet installation 3. End carriage connection 4. Polyurethane buffer installation

At the beginning of new year 2022, 5 sets MQ portal cranes manufactured by Weihua was delivered to Indonesia. 1 MQ25t-32m and 4 MQ40t-38m portal cranes were loaded as full sets on a 180,000-ton cargo ship and shipping to Indonesia. Features of MQ Portal Crane: 1. The portal cranes are all made with the structure of a four-link combined boom and a cylindrical gantry. 2. The slewing part is a large slewing bearing, which can work with hook and grab, and can be used in different working ranges. 3. The corresponding load can be hoisted for horizontal luffing and 360° rotation. 4. The hoisting, luffing and slewing mechanisms can act ind

Equipment need to prepare before installation: Wrench tool box, gear oil, tow rope, forklift, mobile truck crane. The installation steps details: Fill the gearbox oil – end carriage connection – buffer installation – C rail installation – electric box installation – electric hoist installation – adjust the gap to 3~5mm – festoon installation – crane hoisting – conductor rail installation – installation finished. There is an installation guide video for your better understanding. Weihua is a leading material handling solutions provider, providing overh

Necessary tools prepared before installation: Wrench tool box, gear oil, welder, hydraulic jacks, chain block, steel tape measure, tow rope, traction wire rope, wire rope sling, support equipment for leg installation, installation platform for leg installation, forklift, truck crane, etc. The installation details and steps as below: 1. Fill the gearbox oil 2. calculate installation position 3. confirm the diagonals are equal 4. main beam connection installation 5. end carriage installation

Before erection, some tools need to prepare: Wrench tool box, chain hoist, tow rope, traction wire rope, wire rope sling, counterweight, forklift, truck crane, etc. The erection steps as below: Fill the gearbox oil – guard rail installation – bridge platform installation – crane Electric box installation – Signage installation – end carriage installation – crane buffer installation – end carriage door installation – Trolley electric box installation – maintenance cage installation – cabin installation – counterweight placement – Ladder installation – Beam hoisting&Installation – Trolley hoisting&Installation – chain hoist traction beams – end carriage connection – cable guard rail installation – remove the counterweight – drag chain installation – wire rope torsion release – wire rope sling pull the wire rope to crane drum – wind wire rope on crane drum – lower wire rope for hook installation – main hook installation – deputy hook installation – finish erection.

Weihua made some EOT cranes for a machine manufacturing plant project in Mexico. The images show the EOT installation and test at the construction site. Weihua is a leading material handling solutions provider, providing overhead crane, gantry crane, port crane, jib crane, suspension crane, and components, etc.

Weihua fabricated several reducer gearboxes which is successfully packed and ready for delivery to customers. This reducer gear box is a European Standard reducer gearbox designed with the advance technology. It has a modular design with hard tooth surface. For connecting the motor, this reducer adopts a motor direct connection design and is with a brake shaft extension. This reducer gearbox is designed for the European-standard cranes. It has the features of small size and simple installation. After getting the order, Weihua has started intensive preparations. After 2-week production, the reducer has finally successfully

On July, 2021, Weihua signed a strategic cooperation agreement with Northwestern Polytechnical University for setting a Internship Base in Weihua. Han Hong'an, Chairman of Weihua Group, and Zhang Yingfeng, leader of Northwestern Polytechnical University School of Mechatronics announced the establishment of Employment and Practice Base for Northwestern Polytechnical University School of Mechatronics. Weihua President Long Hongxin and Zhang Yingfeng signed the strategic cooperation agreements on behalf of both sides.

Weihua fabricated 17 sets overhead crane for a Mexico machine manufacturing company. The cranes including 11 models single girder overhead crane and double girder overhead crane. After crane shipping, Weihua sent the installation team to Mexico for installation task. The installation team members have all been vaccinated in China, and they will strictly comply with the local epidemic prevention and control requirements. Our installation team will do their best to complete the delivery and installation job to make sure the project successful running.

Recently, the Capacity Upgrade Project of an Iron and Steel Company opening ceremony was held with blast furnace ignition. The capacity upgrade will make a full-line production, opening a new chapter in the optimization and upgrading of the iron and steel industry in Henan Province. Weihua made several capacity 300 tons overhead crane for the steel foundry plant. These overhea cranes are with four-girder four-track structure, which is for the task of foundry process transfer, converter charging, refining and molten steel receiving.

Container RMG Crane for Railway Container Yard at Kazakhstan Container RTG Crane Shipping to Thailand RMG Crane Erection at Thailand Container RTG at Thailand

Weihua bulk material conveying equipment has won much praise for its design capabilities, intelligent electrical control systems, environmentally friendly, dust control technology and full process production capabilities. Now let's have a look. In the first phase of a Wharf Project, Weihua supplied a total of 11 fixed belt conveyors, 5 mobile belt conveyors, 4 transfer stations, 2 transfer funnels, and 2 ship loader, 2 floating cranes. For a terminal project of the 40 million tons/year refining and chemical integration b

March 28, 2021, please remember this day, it is an important milestone in the development of Weihua. On this day, Weihua begin the moving to a new factory, a new intelligent industrial park. At the same time, the former factory, which has been at service for 20 years, began its demolition. On March 29, 2019, Weihua Crane Intelligent Industrial Park laid the foundation. After two years of intense construction, infrastructure such as smart light duty crane workshops, smart material preparation workshops, electrical assembly workshops, bulk materials workshops, office buildings, restaurants, etc. were successfully completed in accordance with the planned schedule; 3 intelligent coating line, 1 girder production line, 3 end carriage automatic robot welding line, and a large number of automated, intelligent, and green process equipment and production lines are put into use; the MES system construction is completed by using big data

On January 26, 2021, Weihua Group and Wuhan University of Technology jointly signed a strategic cooperation agreement for building a Port Logistics Intelligent Equipment Technology R&D Center. Long Hongxin, general manager of Weihua Co., Ltd., and Li Weidong, dean of the School of Logistics Engineering of Wuhan University of Technology, signed a strategic cooperation agreement on behalf of the two parties. Liu Yonggang, deputy general manager of Weihua Co., Ltd., and Cao Xiaohua, deputy dean of the School of Logistics Engineering of Wuhan University of Technology, signed a project cooperation on behalf of both parties. The agreement will jointly open an era of in-depth and comprehensive cooperation between Weihua and Wuhan University of Technology.

On December 21, the opening ceremony of a 100,000-ton graphite electrode project was successfully held. Many leaders and Weihua Group President Mr. Yu Youfei attended the ceremony. There are more than 300 people including city leaders, suppliers, people of design and construction unit attended the event. Graphite electrodes are consumables for smelting iron and steel industry. As all know, the main features of graphite electrode manufacturing are "dirty, tired, and dumb". As an important raw material for steel smelting, and manufacturers have different size requirements for the graphite electrode, and there is no standardized string and transfer equipment. Mostly, people use primitive manual labor methods. For example, small-diameter graphite electrodes from each furnace need more than 20-time grouping and transfers handling, which is time-consuming and labor-intensive, and the efficiency is not high.

A 16m×8m×6m annealing furnace was officially put into use at Weihua Crane Intelligent Industrial Park. This furnace is for heavy structural parts heating and annealing and a 320t crane trolley for metallurgy industry has successfully realized the overall annealing. As the core processing equipment of large metallurgical cranes, this large annealing furnace can meet the annealing treatment of various structural parts of large metallurgical cranes with capacity above 500t, and the equipment processing capacity has reached the leading level in the lifting industry. 1. Precise temperature control The furnace temperature control accuracy is ±3℃, and the furnace temperature uniformity in the same zone is ±10℃. It adopts PLC control mode to automatically realize multiple heating processes.

Weihua opens a new era of smart Crane of 5G + artificial intelligence + industrial Internet and makes the crane a smart robot! Unmanned Crane Weihua AICrane adopt 5G Internet, AI, digital twin, big data, industrial Internet and advanced software design of modularity, openness, and generalization. Smart AI crane can be applied to rolls, boxes, tanks, bulk materials and other various heavy material handling tasks. Weihua AICrane are not only equipped with high-precision anti-sway, positioning, laser scanning and other hardware systems, also with a powerful, information-rich, and smooth-running control system, which can easily respond to various needs of intelligent material handling.

From October 15th to 17th, 2020, Weihua hold the 6th China Changyuan International Lifting Equipment Expo. There are a total of 332 booths planned for this exhibition, which has nearly doubled from 2019. More than 300 exhibitors from China and abroad participated in the event. Among which a total of 257 crane equipment manufacturers, accessory manufacturers and service providers from all over the world participated in the exhibition. Counselor of the State Council, former chief engineer of the General Administration of Quality Supervision, Inspection and Quarantine, member of the National Manufacturing Power Strategy Advisory Committee, deputy director of the China Standardization Expert Committee, chairman of the China Special Equipment Safety and Energy Promotion Association Zhang Gang, director of the Information Technology Development Department of the Ministry of Industry and Information Technology Feng Wei, Director of the Manufacturing Research Office of the Chinese Academy of Engineering, and former President of the General Research Institute of Machinery Industry Qu Xianming, Zhang Jian, Deputy Director of the System Institute of the National Industrial Information Security Development Research Center, Song Xiaogang, Executive Vice President of the China Machinery Industry Federation, China Heavy Han Zhentang, chairman of the Machinery Industry Association and chairman of Taizhong Group, Jing Xiaobo, executive chairman of China Heavy Machinery Indus

For recent years, Weihua has firstly use the automatic coating line in the lifting industry for large structural parts coating of overhead crane and gantry crane, and build 6 intelligent coating production lines to carry out emission control from the start, process, and end to achieve intelligent and green production. Cleaner Environment: The capture rate of waste paint mist generated in the painting process is more than 95%; the exhaust gas treatment efficiency can reach more than 98%, and the VOC exhaust gas is discharged after reaching the standard; the paint slag is sent to the hazardous waste treatment company for centralized treatment and discharge; equipped with noise reduction measures; The maximum surrounding noise does not exceed 80dB, and the ambient noise of operators does not exceed 85dB. The application of the fresh air system improves the working environment and reduces occupational health hazards.