Automatic Coating Line for Crane Manufacture

For recent years, Weihua has firstly use the automatic coating line in the lifting industry for large structural parts coating of Overhead Crane and Gantry Crane, and build 6 intelligent coating production lines to carry out emission control from the start, process, and end to achieve intelligent and green production.

Cleaner Environment:

The capture rate of waste paint mist generated in the painting process is more than 95%; the exhaust gas treatment efficiency can reach more than 98%, and the VOC exhaust gas is discharged after reaching the standard; the paint slag is sent to the hazardous waste treatment company for centralized treatment and discharge; equipped with noise reduction measures; The maximum surrounding noise does not exceed 80dB, and the ambient noise of operators does not exceed 85dB. The application of the fresh air system improves the working environment and reduces occupational health hazards.

More Stable:

The production line realizes the full coating process assembly line operation, taking into account the connection of the front and rear processes, the layout is reasonable, the logistics is smooth, and it is convenient to organize production. The intelligent automatic coating production line can complete the coating operation of the main girder of a crane in 30 minutes. Compared with manual operation, the coating production efficiency is increased by more than 8 times.

Energy Saving:

Pre-treatment, spraying, drying, forced cooling and other operating areas are independently and fully enclosed, benefiting from the application of centralized paint conveying system, automatic spraying system and air conditioning circulating air technology, which can effectively reduce the water, electricity, and gas energy consumption, The operating cost of the spraying production line is reduced by about 15% compared with the traditional production line.

Better quality:

The coating constant temperature system controls the coating working environment temperature at 23°C±2°C, and the drying room temperature is maintained at 80°C, so that the spray quality is more stable; the application of the constant pressure centralized paint delivery system and the automatic spraying technology makes the spraying finer, Which greatly improve the appearance quality of the product.

Weihua is a leading lifting solutions provider in China. Main products: project overhead crane, gantry crane, portal crane, Jib Crane, sts, RMG, RTG, etc.